Hydraulic Roof Support Bolter Anchor Install drilling rig for underground coal mine MYT-150
Although the speed of hydraulic rock bolt drilling rig is lower than that of pneumatic rock bolt drilling rig, its speed, propulsion force and torque are higher than that of pneumatic rock bolt drilling rig, and the noise is also greatly reduced, which will not cause damage to the operator's hearing. In particular, the speed greatly shortens the installation time of the anchor cable and speeds up the support.
The pneumatic bolting rig is not as strong as the hydraulic bolting rig, but the hydraulic bolting rig itself is relatively heavy with a pump station. Each has its own advantages, so it is necessary to choose a bolting rig according to the needs of use.
Large torque, small weight, low noise, high efficiency, drilling a hole with diameter from 27mm to 42mm and 20m depth. The power can be from either the special pump station or the Road Header. It is mainly used for drilling and bolting hole on the roof of coal roadway, mixed coal-rock roadway and rock roadway. The hardness should be f≤10.
Although the speed of hydraulic rock bolt drilling rig is lower than that of pneumatic rock bolt drilling rig, its speed, propulsion force and torque are higher than that of pneumatic rock bolt drilling rig, and the noise is also greatly reduced, which will not cause damage to the operator's hearing. In particular, the speed greatly shortens the installation time of the anchor cable and speeds up the support.
The pneumatic bolting rig is not as strong as the hydraulic bolting rig, but the hydraulic bolting rig itself is relatively heavy with a pump station. Each has its own advantages, so it is necessary to choose a bolting rig according to the needs of use.
Large torque, small weight, low noise, high efficiency, drilling a hole with diameter from 27mm to 42mm and 20m depth. The power can be from either the special pump station or the Road Header. It is mainly used for drilling and bolting hole on the roof of coal roadway, mixed coal-rock roadway and rock roadway. The hardness should be f≤10.
| Description |
MYT-150/320C |
Myt-120/320C |
MYS-50 |
| Rated pressure of power pack MPa |
17.5 |
15 |
6.5 |
| Rated flow rate lpm |
36 |
36 |
36 |
| Rated torque N.m |
150 |
120 |
50 |
| Rated rotation speed rpm |
320 |
320 |
320 |
| Propelling pressure MPa |
0.6-3 |
0.6-3 |
|
| Propelling force of outrigger kN |
1.5-13 |
1.5-13 |
|
| First cylinder propelling force kN |
2.5-13 |
2.5-13 |
|
| Second cylinder propelling force kN |
1.5-7 |
1.5-7 |
|
| Noise dB(A) |
≤92 |
≤92 |
＜92 |
| Rod sleeve size mm |
S=19(22) |
S=19(22) |
|
| Max. height mm |
1620.2580.3070.3550 |
1620.2580.3070.3550 |
|
| Min. height mm |
950.1280.1440.1600 |
950.1280.1440.1600 |
|
| Weight kg |
48.52.54 |
55.52.49 |
16 |
| Pump pack weight kg |
320/366 |
|
| Oil tank capacity L |
130/199 |
|
| Motor capacity kW |
11/15 |
|
| Motor voltage V |
380/660 |
380/660 |
|
