Place of Origin: | industry pump |
Brand Name: | Vertical Desulfurization Pump |
Model Number: | Vertical Desulfurization Pump |
Minimum Order Quantity: | slurry pump |
---|---|
Price: | pump for slurry |
Material: | High Chrome Cast Iron Alloy | Feature: | Anti-abrasion Corrosion Resistant |
---|---|---|---|
Usage: | SO2 Removal |
Vertical Flue-gas Desulfurization Slurry Circluation Pump for fossil-fuel power plant SO2 Removal
Product Description
Flue-gas desulfurization Pump (FGD) is a set of technologies used to remove sulfur dioxide (SO2) from exhaust flue gases of fossil-fuel power plants, and from the emissions of other sulfur oxide emitting processes such as waste incineration. One of its core equipment is the FGD RC Pump. The FGD RC pump manufactured by Shijiazhuang Industrial Pump Factory Co., Ltd. is designed with horizontal, single-case, single-stage, single suction, bracket or suspension type structure. All wet-end parts are made of high chrome alloy material GLH-5 and GLH-6(equivalent to A49). According to the technical scheme, by adopting optimized structural design and special modified materials, abrasion and corrosion resistance of the desulphurization pump can be achieved, and the service life of the desulphurization pump is prolonged.
Pump Features
The series medium horizontal desulphurization pump offer the special features of being high in efficiency, long in service life, reliable in operation.
The wet parts are made of chrome-nickel alloy with high abrasive and corrosive resistance. The clearance between cryween crystalline is very small; so the material has the ability of inter crystalline crack resistance under corroded by chlorion and high mechanical strength.
The series desulfurization pumps can operate reliably lest the or nonmetallic pumps appear fragment, avulsion and distortion.
The hydraulic loss coefficient is small. The hydraulic efficiency of DT series desulfurization pumps is higher 3% than that of other pumps with the same parameters.
- Single stage, single suction, vertical centrifugal pump
- Wet parts such as casing, impeller, liner plate in anti-abrasion and corrosion-resistant high chrome cast iron alloy.
- For fluid of high concentration, inlet agitator is designed
-According to the depth of the pit, suction pipe can be added to the pump inlet.
- Hydraulic optimization design and stable operation
Performance and Main Technical Datas of TL Desulphurizations Pumps
Type
|
Allowable
max.power of ass.motor(kW) |
Clear water
performance |
Particle max.
Size handled
occasionally (mm)
|
Pump weight
(kg)
|
||||
Q
Capacity
(m3/h)
|
H
Head
(m)
|
n
Speed
(r/min)
|
Max.eff.
(%)
|
(NPSH)r
(m)
|
||||
150TL-A35
|
30
|
99-364
|
3.0-17.9
|
490-980
|
69.0
|
/
|
15
|
712
|
100TL-A34
|
45
|
74-293
|
5.5-36.8
|
700-1480
|
65.8
|
/
|
14
|
502
|
80TL-A45
|
110
|
59-286
|
12.5-81.6
|
700-1490
|
58.4
|
/
|
15
|
785
|
80TL-A36
|
45
|
50-201
|
7.3-45.5
|
700-1480
|
58.2
|
/
|
12
|
645
|
65TL-A40
|
45
|
30.2-142.8
|
10.2-62.6
|
700-1480
|
50.0
|
/
|
12
|
658
|
65TL-A30
|
18.5
|
18-98
|
5.9-34.7
|
700-1470
|
53.7
|
/
|
8
|
436
|
50TL-A45
|
55
|
21.9-117.3
|
10.4-78.4
|
700-1480
|
39.9
|
/
|
9.5
|
778
|
50TL-B40
|
30
|
15-65
|
8.6-58.3
|
700-1470
|
34.1
|
/
|
9
|
502
|
50TL-A35
|
22
|
19-87
|
6.8-45.3
|
700-1470
|
48.1
|
/
|
15
|
498
|
40TL-A35
|
18.5
|
9.4-47.6
|
7.2-43.9
|
700-1470
|
38.7
|
/
|
7
|
524
|
40TL-B25
|
5.5
|
4.9-22.9
|
3.9-21.5
|
700-1440
|
37.6
|
/
|
8
|
225
|
40TL-A21
|
4
|
4.6-25.9
|
3.3-17.0
|
700-1440
|
44.6
|
/
|
10
|
210
|
25TL-A15
|
5.5
|
4.3-19.3
|
3.9-30.8
|
1390-2900
|
29.8
|
/
|
8
|
195
|
Note:
1.(NPSH)r refers to the value at the specified point at the second speed in the sample book.
2.The normal size of particle handled is 56% of the max.size that can be handled occasionally.
Application:
-Pit pump for pumping sewage in desulphurization system of power plant
-other corrosion and abrasion condition